The Nabto Edge Embedded SDK
The vendor integrates the Nabto Edge Embedded SDK in the target device application (typically an IoT device) to be remote controlled.
The SDK is available as open source ANSI C code in github under a commercial license. That is, you can use and modify the source as needed as long as it is for use in a project as agreed with Nabto.
In this way integration on specific embedded devices becomes simpler as you can tweak and optimize exactly as necessary using any specific tools available for the target platforms without depending on precompiled libraries delivered by Nabto.
The vendor’s embedded application is shown as the topmost black box in the following figure. It uses the Nabto Edge Embedded SDK. The SDK in turn needs integration to the specific underlying operating system and/or hardware.
Nabto provides a set of ready-to-use integrations. As of writing Linux is the only embedded-flavor operating system supported (with additional support for macOS and Windows for development). Ready-to-use integrations for true embedded systems is underway, for instance esp32 integration will be added in the early Q3 2020.
Integrating to a new system, e.g. a currently unsupported (RT)OS and/or IP stack, is supported through an integration layer, described in the integration guide and step-by-step instructions with test harness and interface stubs to implement.
Obtaining The Nabto Edge Embedded SDK
The Nabto Edge Embedded SDK is obtained from github, preferably using a git client to retrieve dependencies automatically (the
git clone --recursive https://github.com/nabto/nabto-embedded-sdk
The external dependencies as well as 3rd party software included in the SDK repo are all under MIT, Apache 2.0 or similar license (no GPL).
Building for test and development on desktop systems
To build the SDK libraries and example applications for Linux, macOS and Windows, CMake must be installed as well as standard development tools (gcc, Xcode or Visual Studio respectively).
Perform the following steps in a terminal / command console:
cd nabto-embedded-sdk mkdir _build cd _build cmake -DCMAKE_INSTALL_PREFIX=../_install .. cmake --build . --config Release --target install
The result looks as follows:
../_install ├── bin │ ├── embedded_unit_test │ ├── futures_example_device │ ├── heat_pump_device │ ├── platform_integration_stub │ ├── simple_coap_device │ └── tcp_tunnel_device ├── include │ └── nabto │ ├── nabto_device.h │ └── nabto_device_experimental.h └── lib └── libnabto_device.dylib 4 directories, 6 files
Run the unit tests to see everything works:
$ ./bin/embedded_unit_test -p Running 68 test cases... 0% 10 20 30 40 50 60 70 80 90 100% |----|----|----|----|----|----|----|----|----|----| *************************************************** *** No errors detected
libnabto_device library can be linked to by your own application. See the example applications.
If you see an error as follows:
CMake Error at 3rdparty/libevent/CMakeLists.txt:10 (add_subdirectory): The source directory /tmp/nabto-embedded-sdk/3rdparty/libevent/libevent does not contain a CMakeLists.txt file.
then you most likely did not clone recursively, e.g. you forgot to specify the
--recursive commandline option to
git. If so, either start over or retrieve the dependencies using the following:
git submodule update --recursive --init
Building for embedded systems
Please see the integration guide for detailed instructions on how to adapt to and cross build for a custom embedded system.
A more elaborate application development guide will be available in Q3 2020.